The strips of the DELTA LS RUBI levelling system are available in different thicknesses, to allow installation in joints of 1 mm, 1.5 mm, 2 mm and 3 mm, as well as at various heights, to work with ceramic tiles of various thicknesses: 3-12 mm, 6-15 mm or 11-20 mm.
The strips of the DELTA LS system allow tilers to work with any type of tile spacer, and thereby ensure the best levelling and positioning of ceramic tiles.
The design of the DELTA LEVELLING strips from RUBI, combined with the technical plastic material they are made of, ensure that whenever the levelling pressure is exerted, only the highest piece is lowered, avoiding the creation of air bubbles in the adhesive.
RUBI offers DELTA LS strips to professional ceramic tilers in three different packages; bags of 100, 200 and 400 units (for some specific models there is also a 2400 unit box available), thereby allowing investment savings in consumable parts.
The DELTA LS levelling system from RUBI is ideal for laying large format ceramic tiles (minimum size required: 30x30 cm.) by the back buttering technique.
The design of the DELTA LEVELLING SYSTEM strips allows them to be removed by impact (kick or mallet). Removal by impact should always be in the direction of the grout joint.
DELTA LEVELLING SYSTEM prevents the movement of parts when the adhesive is setting and improves the resulting surface flatness.
Thanks to the DELTA LEVELLING SYSTEM, the ceramic tile fixer sees how work time is reduced and the profitability of installation work improves, avoiding levelling errors that occur during mortar drying.
- 3 mm strip for tiles from 6 to 15 mm.
- Different models available:
- Strip 1.5 mm/ 2 mm. for tiles from 11 to 20 mm.
- Strip 1 mm/ 1.5 mm and 2 mm. for tiles from 3 to 12 mm.
- Made in PP.
Videos DELTA LEVELLING SYSTEM strips
References and models for DELTA LEVELLING SYSTEM strips
Tile level system calculator*Approximate calculation without considering perimeter or intermediate partitions of the surface to tile.