Videos DELTA LEVELLING SYSTEM wedges
- Made in PP.
The DELTA LEVELLING SYSTEM wedges from RUBI allow the pressure exerted on the ceramic tiles to obtain optimum levelling of the tiles. Resulting in a homogeneous final flatness for the entire surface.
The system of horizontal placement of the DELTA LEVELLING SYSTEM wedges allows a first quick and intuitive installation, by hand, to finally make the final pressure with the DELTA LS nippers without effort or delay.
The DELTA LEVELLING SYSTEM wedges are manufactured in PP, which, thanks to its high strength, allows these items to be reused several times.
RUBI offers DELTA LS wedges to professional ceramic tilers in three different packages; bags of 100, 200 and 400 units, respectively, and a large volume box of 1200 units, thus allowing savings in investment in the levelling system components.
The DELTA LEVELLING SYSTEM from RUBI is ideal for laying large format ceramic tiles (minimum size required: 30x30 cm.) and thicknesses of 3-12, 6-15 and 11-20 mm. (depending on the model of the DELTA LS strips) using the back buttering technique.
DELTA LEVELLING SYSTEM prevents the movement of parts when the adhesive is setting and improves the resulting surface flatness.
Thanks to the DELTA LEVELLING SYSTEM, the tile fixer sees how work time is reduced and the profitability of ceramic tile installation work improves. Another interesting aspect of the DELTA LS levelling system from RUBI is to assure us, after drying the mortar, that the end result is what we leave, with no surprises later due to different drying zones where, in a conventional tile fixing, the tiles may have become uneven.
References and models for DELTA LEVELLING SYSTEM wedges
Tile level system calculator*Approximate calculation without considering perimeter or intermediate partitions of the surface to tile.