EASYGRES diamond drill bits kit
Description
The EASYGRES drill bit kits are the most economical solution for users who need to carry out drilling, with different diameters and in any type of ceramic tile.
The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill.
The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows the drilling of stoneware, porcelain tiles, granite, marble and glass.
RUBI offers the building professional different product kits with configurations tailored to the most common situations.
For smaller diameters (6-12 mm), RUBI offers the practical EASYGRES kit consisting of: one or more drill bits (depending on the model), the practical EASYGRES guide, the corresponding centring bushings (depending on the number of bits contained in the kit) and fastening adhesives.
The EASYGRES guide allows you to make holes in both the ground and the wall, thanks to the functional design of its water tank that includes a flow control valve. The guide is easily attached to any surface, thanks to its renewable adhesive system.
In addition to these practical kits, RUBI also offers the EASYGRES PLUS kit consisting of: 7 EASYGRES drill bits (20, 28, 35, 43, 50, 68 and 75 mm diameter), a MULTIDRILL centring guide, a tank and hose unit and a practical case.
Finally, and thinking of the most common use of these types of drill bits, we have the EASYGRES 35 mm kit. This kit offers the possibility of acquiring the most widely used drill bit diameter (35 mm) along with all the necessary accessories: MULTIDRILL guide and tank and hose units.
The average life of the EASYGRES drill bits varies according to the diameter, in 6-12 mm EASYGRES the average life is 10 holes and in 20-120 mm EASYGRES the average life is 25 holes. The average life of the drill bits ALWAYS depends on the type of material, its thickness and proper cooling and use.
The drilling depth of EASYGRES drill bits is 25 mm.
The EASYGRES drill bits have a lateral opening which improves the cooling of the drill bit and facilitates the removal of solid residues after each drilling. Before further drilling we must ensure that the drill bit is clean and free of any obstruction.
The recommended speed for use of EASYGRES drill bits is between 400 and 1000 rpm, depending on the material being drilled.
For a better finish and longer drill bit life, it is important to respect the proper rotation speed and exert moderate pressure during drilling.
Features
- The EASYGRES guide allows holes both vertically and horizontally, thanks to its functional design incorporating a water tank with flow control valve.
- The EASYGRES guide attaches easily to any surface, thanks to its renewable adhesives.
-
Wet cutting
-
Patented
Videos EASYGRES diamond drill bits kit
References and models for EASYGRES diamond drill bits kit
- Ref. - 4929
- EAN-13 - 8413797049299
- Revolutions per minute - 1000 max.
- Maximum drill length - 25 mm
- Units per box - 10
- Units per pallet - 800
- 3 Points:
- format_align_justify Show barcode
- Ref. - 4927
- EAN-13 - 8413797049275
- Revolutions per minute - 1000 max.
- Maximum drill length - 25 mm
- Units per box - 10
- Units per pallet - 800
- 3 Points:
- format_align_justify Show barcode
- Ref. - 4904
- EAN-13 - 8413797049046
- Revolutions per minute - 1000
- Maximum drill length - 25 mm
- Units per box - 10
- 8 Points:
- format_align_justify Show barcode
- Ref. - 50937
- EAN-13 - 8413797509373
- Revolutions per minute - 500 max.
- Maximum drill length - 27 mm
- Units per box - 1
- Units per pallet - 48
- 42 Points:
- format_align_justify Show barcode
- Ref. - 4919
- EAN-13 - 8413797049190
- Revolutions per minute - 1000 max.
- Maximum drill length - 25 mm
- Units per box - 10
- Units per pallet - 800
- 4 Points:
- format_align_justify Show barcode
- Ref. - 4928
- EAN-13 - 8413797049282
- Revolutions per minute - 1000 max.
- Maximum drill length - 25 mm
- Units per box - 10
- Units per pallet - 800
- 3 Points:
- format_align_justify Show barcode
- Ref. - 50921
- EAN-13 - 8413797509212
- Revolutions per minute - 500 max.
- Maximum drill length - 27 mm
- Units per box - 1
- Units per pallet - 720
- 14 Points:
- format_align_justify Show barcode
- Ref. - 4909
- EAN-13 - 8413797049091
- Revolutions per minute - 1000 max.
- Maximum drill length - 25 mm
- Units per box - 10
- Units per pallet - 800
- 4 Points:
- format_align_justify Show barcode
rate_review
Product reviews
Super bardzo fajnie wiercą otwory w szkliwionej ceramice polecam
translate Google Translate
Bardzo solidny zestaw Bez żadnego problemu wierci w gres i ceramika oraz inne twarde i miekkie Praktyczny zbiornik na wode
translate Google Translate
Bardzo solidny zestaw Bez żadnego problemu wierci w gres i ceramika oraz inne twarde i miekkie szkło Bardzo przydatna pompka oraz przystawka z prowadzeniem otworu Jestem bardzo zadowolony z tego zestawu
translate Google Translate
Koronki. Zawsze z nimi byl problem. Ale od kat je mam jestem z nich bardzo zadowolony. Tylko oczywiscie wkretarka i powoli. Nic na sile.
translate Google Translate
Rewelacja. Polecam każdemu kto nie lubi pylenia przy wierceniu otworów. Świetnie radzi sobie w każdym materiale.
translate Google Translate
Zestaw niesamowity, nie ma gresu który się nie podda pod koronkami, intensywnie używam od prawie dwóch lat i z całą pewnością mogę je polecić
translate Google Translate
Jest dobrze w porownaniu do innych koronek jak na razie radza sobie doskonale i oby to trwalo jak najdluzej pelna profesja w miejscu pracy
translate Google Translate
Jestem bardzo zadowolony z tych otwornic , są naprawdę super i dają radę w bardzo twardych gresach, warto wydać te pieniądze i ułatwić sobie pracę i przyspieszyć wykonanie zlecenia
translate Google Translate
Słabe wiertła, dobre do ceramiki a gresie nie dają rady. Jeden otwór wywiercony w gresie i już tępe wiertło.
translate Google Translate
Fantastische product en systeem werkt super, gebruik het heel veel. Doe zelf de witte sticker op muur andere zijde op de houder.
translate Google Translate
Wszystko w porządku. Cięcie jest szybkie, system trzymania otwornicy spełnia swoją funkcję. Chłodzenie bardzo wydajne.
translate Google Translate
Koronki na mokro są super!!! Wiercą we wszystkich płytkach także gresowych. Pompka, super sprawa samemu można tym sprzętem pracować.
translate Google Translate
Bardzo dobrze radzi sobie nawet z twardymi gresami otwory sa idealne cena do jakosci jak dla mnie rewelacja
translate Google Translate
Otwornice spisały się. Do miękkich plytek sa super. Do gresów troszkę dłużej to trwa ale w tej cenie produkt ok. Po roku użytkowania nadal działają może oprócz pompki ktora nie do końca trzyma ciśnienie.
translate Google Translate
Otwornice poradziły sobie z 15mm gresową płaskorzeźbą bez problemów, warto wydać parę złotych w dobrej jakości narzędzia. Jedynym minusem jest brak możliwości używania przyssawki przy małych płytkach co ułatwiło by wiercenia.
translate Google Translate
Très bon kit, qui malgrais tout ce fatigue vite a mon goût, j'ai fait une salle de bain et ma cloche de 67 est déjà hs
translate Google Translate
Bardzo dobry produkt a wraz z dozownikiem wody to rewelacja. Tylko trzeba nie za wysokie obroty i lekko dociskac i idzie jak w masło. Polecam.
translate Google Translate
Polecam ten zestaw idealne wiercenie otworów przysawka sprawdza się koronką nie ucieka polecam i pozdrawiam
translate Google Translate
Tem tudo o que é preciso para fazer uma furação perfeita nos azulejos. Permite trabalhar com muita rapidez e perfeição. Já não faço nenhum furo em azulejo sem esta ferramenta.
translate Google Translate
Jestem bardzo zadowolony z zestawu. Używam tych wierteł głównie do gresu i naprawdę dają rade. Jedna otwornica wystarcza mi na 10-12 otworów w gresie, co jest dobrym wynikiem przy tej cenie. Ponadto prowadnica i hydronetka, które są w zestawie, bardzo ułatwiają i przyspieszają pracę. Plusem jest jeszcze fajna walizka. Naprawdę warto, polecam!
translate Google Translate