Products not available in our current catalog

Product highlights

  • Effectively removes epoxy residue bonded to walls & floors.

Materials

  • For porcelain tiles, glazed tiles, rustic tiles & glass mosaic tiles etc.

Use

  • As epoxy joints can be very difficult to remove, ideally cleaning should be carried out within 24 hours of placement of the joint for the best result. Apply the product directly to epoxy residue.
  • Dry with a cotton cloth
  • Repeat the process, if necessary. For large areas it is recommended to let the product work about 3 hours and remove using a scraper.
  • Leave working for 1 hour.
  • Scrub well with a brush or scouring pad and then rinse with plenty of water whilst continuously scrubbing

Features

  • Product for removing traces of epoxy joints on glazed ceramic surfaces, porcelain tiles and glass mosaic tiles. It's high viscosity allows for easy application on both horizontal and vertical surfaces.

Products not available in our current catalog

Technical Specifications

  • Solvent based cleaner.

Density

  • 0,972 Kg/L

Ingredients

  • N-Ethyl-2-Pyrrolidone, 2-Diethylaminoethanol, Hydroxypropyl Methylcellulose

PH

  • Not applicable
  • Not applicable

Precautions

  • Applying this product on polished natural stone or crystallized surfaces can deteriorate the brightness. Applied on waxed surfaces can remove the wax. Avoid contact of the product with plastic surfaces.
  • ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA BEFORE FULL APPLICATION!

Performance

  • About 2 - 12 m2 / L
  • Note: the yield values are purely guideline values

Advantage

  • For use on walls and floors.
  • Easy Application.

Description

RC-42 Epoxy Remover effectively removes dried remains of epoxy joints on porcelain tiles, glazed tiles and mosaic tiles.

In addition to its easy application, another great advantage of RC-42 Epoxy Remover is that it is suitable for both floor and wall tiles.

RC-42 Epoxy Remover is a product for removing dry traces of epoxy joints on glazed ceramic surfaces, porcelain tiles and glass mosaic tiles. Its high viscosity allows for easy application on both horizontal and vertical surfaces.

As epoxy joint stains can be very difficult to remove, cleaning should ideally be carried out within 24 hours of placement of the joint. The effectiveness of the product may be affected for residue left for more than 72 hours.

For the correct application of RC-42 Epoxy Remover, RUBI recommends the following steps:

1. Apply the product on the stain.

2. Leave to work for an hour.

3. Scrub vigorously with a brush or scouring pad and then rinse with plenty of water while continuing to scrub.

4. Dry with a cotton cloth

5. If dirt remains, repeat the process.

6. For heavily encrusted areas, it is recommended to leave product to work for approximately 3 hours and remove using a scraper.

RC-42 Epoxy Remover is a solvent-based cleaner with a density of 0.972 Kg/l.

The approximate performance of RUBI RC-42 Epoxy Remover can vary between 2 and 12 m²/l.

Note: Performance is indicative, since the product is applied to specific and very localized areas.

Ingredients: N-ethyl-2-pyrrolidone, 2-Diethylaminoethanol, hydroxypropyl methylcellulose.

To apply RC-42 Epoxy Remover correctly and safely, RUBI recommends taking into account the following precautions:

- Applying to polished and crystallized natural stone surfaces or to resin agglomerates may reduce shine.

- When applied to waxed surfaces, it may remove the wax.

- Avoid contact of the product with plastic surfaces and painted surfaces.

ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA TO ASSESS THE RESULTS.

RC-42 Epoxy remover

Products not available in our current catalog


References and models for RC-42 Epoxy remover

RC-42 Epoxy remover 1 l
  • Ref. - 23992
  • EAN-13 - 8413797239928
  • Units per box - 6
  • Units per pallet -

You need to be logged in as a Club Rubi member to leave a comment

Log in