Products not available in our current catalog

Description

RO-83 Wet Look brings out and naturally improves the tone of medium and high porosity surfaces.

It is very easy to apply.

RO-83 Wet Look is a product designed to bring out the hues of clay, natural unpolished stone, brick, tuff, concrete and slate walls and floor tiles. Creates an attractive wet look on these surfaces and also offers lightweight water repellent protection.

In addition to changing the hue of the material, RUBI RO-83 Wet Look gives the treated surface a light waterproof protection, thus facilitating cleaning and protecting the surface.

To apply RO-83 Wet Look correctly, RUBI recommends performing the following steps:

1. The surface should be clean and dry. Pour the product into a clean container.

2. Dip a roller, brush or sponge into the container and soak it in the product.

3. Apply a thinner or thicker layer depending on the porosity of the product. On very porous surfaces, two layers may be applied.

4. Leave to dry for 24 hours.

RUBI RO-83 Wet Look is a solvent-based product with a density of 0.9 Kg/l.

The performance of RO-83 Wet Look is approximately 5 m²/l.

Note: Performances are merely indicative.

To apply RO-83 Wet Look safely and appropriately, RUBI recommends taking into account the following precautions:

- Before application, the surface should be clean, dry and completely moisture free.

- In newly placed tiles, salt may be produced, potentially for months, owing to the curing process of the materials involved. In these cases, you should wait until the end of this salt production process before applying the product.

- It is recommended to work with good ventilation.

- Do not apply the product by spraying, as harmful vapours may be generated.

ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA TO ASSESS THE RESULTS.

Product highlights

  • Highlights and heightens the natural tones of porous surfaces.

Materials

  • For use on baked clay, natural unpolished stone, brick, terrazzo, concrete and slate

Use

  • Surface should be clean and dry. Pour the product into a clean tray
  • Allow to dry for 24 hours
  • Using a roller, brush or sponge, soak in the product
  • Apply an even layer, using more or less depending on the porosity of material. On very porous surfaces you may require two layers.

Features

  • Product designed for bringing out and heightening the tone of surfaces naturally on baked clay, natural unpolished stone, brick, granite, concrete & slate. Creates an effective wet look on these surfaces and also offers lightweight water repellent protection.

Technical Specifications

  • Solvent.

Density

  • 0,90 Kg/L

PH

  • Not applicable
  • Not applicable

Precautions

  • Before application, the surface should be clean, dry and completely moisture free. In newly placed tiles, salt may be produced, potentially for months, owing to the curing process of the materials involved. In these cases, you should wait until the end of this salt production process before applying the product.
  • ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA BEFORE FULL APPLICATION!
  • It is recommended to work with good ventilation. Do not apply the product by sprayer, since the generated vapors could be harmful.

Performance

  • About 5 m2 / L.
  • Note: the yield values are purely guideline values

Advantage

  • Easy Application.
  • Natural effect

Products not available in our current catalog


References and models for RO-83 Wet look

RO-83 Wet look 1 l
  • Ref. - 23988
  • EAN-13 - 8413797239881
  • Units per box - 6
  • Units per pallet -
  • card_giftcardPoints: 4
  • format_align_justify Show barcode
    close
RO-83 Wet look 5 l
  • Ref. - 22959
  • EAN-13 - 8413797229592
  • Units per box - 2
  • Units per pallet -
  • card_giftcardPoints: 17
  • format_align_justify Show barcode
    close
RO-83 Wet look 25 l
  • Ref. - 22968
  • EAN-13 - 8413797229684
  • Units per box - 1
  • Units per pallet - 12
  • card_giftcardPoints: 58
  • format_align_justify Show barcode
    close