Products not available in our current catalog

Product highlights

  • Prevents stains (soft drinks, wine, oil, coffee, etc.) Penetrates directly into the pores, making future cleaning easier.

Materials

  • For baked clay, mosaic, facing brickwork, clinker & concrete.

Use

  • Using a roller or brush, soak in the product.
  • Although the product dries within a few hours, you should wait at least 24 hours before walking on the surface to ensure maximum protection
  • Surface should be clean and dry. Pour the product into a clean tray
  • Depending on the porosity of the material, apply one thick layer or several thin layers until almost at surface saturation.

Features

  • High quality water & oil repellent product, suitable for the protection of all types of stains (both water- and oil-based) on surfaces of medium and high porosity such as baked clay, tuff, bricks, concrete, natural stone porous unpolished, etc. It can be used both indoors and outdoors and thanks to its studied formulation does not generate a film, allowing the correct breathability of the surface.

Products not available in our current catalog

Technical Specifications

  • Solvent based waterproofing

Density

  • 0,87 Kg/L

PH

  • Not applicable
  • Not applicable

Precautions

  • Before application, the surface should be clean, dry and completely moisture free. In newly placed tiles, salt may be produced, potentially for months, owing to the curing process of the materials involved. In these cases, you should wait until the end of this salt production process before applying the product.
  • It is recommended to work with good ventilation. Do not apply the product by sprayer, since the generated vapors could be harmful.
  • ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA BEFORE FULL APPLICATION!

Performance

  • About 2 - 10 m2 / L for highly porous materials like brick or clay and 10-20 m2 / L for natural stone and other porous materials.
  • Note: the yield values are purely guideline values

Advantage

  • Stops stains
  • Does not change the original appearance

Description

RP-50 Stain Protector (Porous Surfaces) prevents stains from soft drinks, wine, oil, coffee, etc., penetrating into the pores of the material, minimizing damage and facilitating subsequent cleaning.

Besides protecting against stains, RP-50 Stain Protector (Porous Surfaces) does not change the original appearance of the treated surfaces.

RP-50 Stain Protector (Porous Surfaces) is a high quality, water and oil repellent product suitable for protection against all types of stains (both water-based and oil-based) on medium and high porosity surfaces, such as clay, tuff, bricks, concrete, porous and unpolished natural stone, etc.

It can be used both outdoors and indoors and owing to its specially designed formulation and it does not create a film, allowing the surface to breathe properly.

For the correct application of RP-50 Stain Protector (Porous Surfaces), RUBI recommends the following steps:

1. Before applying the product, the surface should be clean and dry. Pour the product into a clean container.

2. Dip the roller or the brush into the container and soak it in the product.

3. Depending on the porosity of the material, apply one thick layer or several consecutive layers until the surface is almost saturated.

4. Although the product dries within a few hours of its application, we recommend that you leave the product for the entire curing time (24 hours) before walking over it or putting the surface into service to ensure maximum protection.

RP-50 Stain Protector (Porous Surfaces) is a solvent-based waterproofing agent with a density of 0.87 Kg/l.

The performance of RP-50 Stain Protector (Porous Surfaces) is approximately 2-10 m²/l for very porous materials such as brick or clay and 10-20 m²/l for natural stone and other porous materials. Note: Performances are merely indicative.

RUBI recommends taking into account the following precautions in order to apply RP-50 Stain Protector (Porous Surfaces) correctly and safely:

- Before application, the surface should be clean, dry and completely moisture free.

- In newly placed tiles, salt may be produced, potentially for months, owing to the curing process of the materials involved. In these cases, you should wait until the end of this salt production process before applying the product.

- It is recommended to work with good ventilation.

- Do not apply the product by spraying, as harmful vapours may be generated.

ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA TO ASSESS THE RESULTS.

RP-50 Stain protector (porous surfaces)

Products not available in our current catalog


References and models for RP-50 Stain protector (porous surfaces)

RP-50 Stain protector (porous surfaces) 25 l
  • Ref. - 22967
  • EAN-13 - 8413797229677
  • Units per box - 1
  • Units per pallet - 12
RP-50 Stain protector (porous surfaces) 1 l
  • Ref. - 23956
  • EAN-13 - 8413797239560
  • Units per box - 6
  • Units per pallet -
RP-50 Stain protector (porous surfaces) 5 l
  • Ref. - 22954
  • EAN-13 - 8413797229547
  • Units per box - 2
  • Units per pallet -

You need to be logged in as a Club Rubi member to leave a comment

Log in