Product highlights

  • Effective protection for affected areas of white salt treatment.

Materials

  • For clay, porous unpolished natural stone, brick & concrete

Use

  • Surface should be clean and dry. Pour the product in a clean tray.
  • Using a roller or brush, soak in the product
  • Depending on the porosity of the material, apply a thick layer or several thin layers until almost at saturation of the surface
  • Although the product dries within a few hours, you should wait at least 24 hours before walking on the surface to ensure maximum protection

Features

  • Waterproof product for protection from water-based stains like wine & soft drinks etc. To avoid efflorescence (salt) in flooring materials and facades of medium to high porosity such as terracotta, brick, concrete & unpolished porous natural stone etc. It can be applied both indoors and outdoors.

Technical Specifications

  • Solvent based waterproofing

Density

  • 1,044 Kg/L

PH

  • Not applicable

Precautions

  • Before application, the surface should be clean, dry and completely moisture free. In newly placed tiles, salt may be produced, potentially for months, owing to the curing process of the materials involved. In these cases, you should wait until the end of this salt production process before applying the product.
  • It is recommended to work with good ventilation. Do not apply the product by spraying, as harmful vapours may be generated.
  • ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA TO ASSESS THE RESULTS.

Performance

  • About 2 - 20 m2 / L depending on the material to be treated.
  • NOTE: Performances are merely indicative. Actual results may vary

Advantage

  • Prevents salts.
  • Does not change original appearance.

Description

The RP-52 Bloom Protector treats and effectively protects surfaces affected by efflorescence.

The product does not change the original appearance of the treated surface and prevents the appearance of salts.

The RP-52 Bloom Protector is a water-repellent product suitable both for protecting against water-based stains (wine, soft drinks, etc.) and for preventing the appearance of efflorescence (salt) in flooring tiles and frontages of medium to high porosity materials such as clay, brick, tuff, concrete and unpolished porous natural stone, etc. It can be used both indoors and outdoors, and owing to its studied formulation does not generate a film, allowing the surface to transpire properly.

For the correct application of the RP-52 Bloom Protector, RUBI recommends the following steps:

1. The surface should be clean and dry. Pour the product into a clean container.

2. Dip a roller or brush into the container and soak it in the product.

3. Depending on the porosity of the material, apply one thick layer or several consecutive layers until the surface is almost saturated.

4. Although the product dries within a few hours, we recommend that you leave the product for the entire curing time (24 hours) before walking over the surface to ensure maximum protection.

The RP-52 Bloom Protector is a solvent-based waterproofing agent with a density of 1.044 Kg/l.

The product has a performance of approximately 2 to 20 m²/l depending on the material to be treated. Note: Performances are merely indicative.

RUBI recommends taking into account the following precautions in order to apply RP-52 Bloom Protector correctly and safely:

- Before application, the surface should be clean, dry and completely moisture free.

- In newly placed tiles, salt may be produced, potentially for months, owing to the curing process of the materials involved. In these cases, you should wait until the end of this salt production process before applying the product.

- It is recommended to work with good ventilation.

- Do not apply the product by spraying, as harmful vapours may be generated.

ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA TO ASSESS THE RESULTS.

RP-52 Bloom protector

References and models for RP-52 Bloom protector

RP-52 Bloom protector 5 l
  • Ref. - 22956
  • EAN-13 - 8413797229561
  • Units per box - 2
  • Units per pallet -
RP-52 Bloom protector 1 l
  • Ref. - 23964
  • EAN-13 - 8413797239645
  • Units per box - 6
  • Units per pallet -

You need to be logged in as a Club Rubi member to leave a comment

Log in