You’ve just installed your tiles and everything looks set except there are spaces between the tiles. What do you do? Simply apply grout between these spaces using a grout float. This creates the impression of a continuous surface.

You’ve just installed your tiles and everything looks set except there are spaces between the tiles. What do you do? Simply apply grout between these spaces using a grout float. This creates the impression of a continuous surface.

What Is a Grout Float?

This is a tool that’s designed to apply grout in spaces between mosaic, stones, and tiles. Grout floats are typically used by stone and tile installers.

Once the grout is applied, the tile installer uses a grout float to spread out the grout before forcing it into the cracks and crevices between tiles. And since it’s made of rubber, your tiles will have no chips o scratches after the grout is applied.

What Is Grout?

It is a cement-based concrete paste that is used to fill cracks, lines, and crevices. Typically, it is used after tile installation to help maintain the integrity of the design by holding each piece together. Grout can also be applied between mosaic on walls or floors.

Once applied, grout requires proper maintenance to keep it firm, uncracked and clean. If it’s not cared for, grout begins to harbor bacteria and mold. This will not only damage your floor but it will also pose a health risk to your pets and family members.

How to Apply Grout Using a Grout Float

The first step involves picking the grout you will use on your floor. Grout is available in two variants: unsanded and sanded. Use sanded if the cracks, crevices or spaces you are trying to fill are more than 1/8” wide.

This is because sanded is stronger, more durable and helps maintain the structure. Also, be sure to pick a color that matches that of your décor.

Dark grout is said to accentuate the layout and pattern of your tiles while light grout creates a more cohesive look. Light grout requires regular maintenance as it gets shows more bacteria and dirt.

To successfully apply grout float, you’ll need the following:

  • Grout mixer
  • 2 large sponges
  • 4 big buckets
  • Hard, rubber grout float
  1. Mix the Grout

Grout comes in powder form and it is then mixed with water at ratio prescribed on its package. Add the recommended amount of water (check manufacturers instructions) in one of your buckets and then add the grout powder. It is well recommended to use an electric mixer to get the perfect mixture.Use a hard grout float to stir the mixture. Add the remaining amount of water and mix.

You want your mixture to have just the viscosity. It should not be too dry nor should it be too watery. The ideal grout mixture should look like smooth peanut butter.

  1. Apply the Grout

The best way to test your grout is to apply it to a small area. Once you are sure that it’s good enough to proceed to apply to the rest of the floor. Also, if you intend to apply the grout on both the floor and the wall, always begin with the wall.

It’s easier to start with the wall than the floor, as it will prevent mishaps. Starting with the floor means you have to step on it as you apply your grout on the wall. You will end up messing up your finished floor.

Use a hard trowel to scoop grout onto the floor. Hold the grout float at 45 degrees to the floor and firmly press it down. Apply the grout in diagonal strokes.

Make sure you cover the entire floor with grout including the tile. Hold your grout float at 90 degrees to the floor and thin out excess grout on the tile leaving a smooth and even surface. This will also make it easier to clean up after you finish up.

Limit your grout application to a small area, preferably 3 tiles by 3 tiles.

  1. Remove the Excess Grout

Dip a sponge in clean water and squeeze it until it is damp, not wet. Too much water moisture will result in the grout not hardening and settling. Be sure to squeeze the sponge well enough before you can apply it to your grout.

Use the sponge to wipe as if you are wiping beer spill on a counter. Place one corner of your sponge on the wall drag it in a single continuous stroke along the tiles. Rotate the sponge to use the unused corners, drag it along another tile until all 4 corners are dirty.

Dip it in clean water, wring it and continue from where you left. This will ensure that all the excess grout is removed in a smooth and effective way. DON’T use to much water or scrub the grout.

Also, allow the grout enough time to dry. You can test this by pressing with your finger and check for dents. A well-dried grout will not have any dents while poorly dried grout will have dents shape like your finger.

  1. Test the Area

To get a feel of what the floor will look like, test the grout on a small area. Apply on a small area and use a rubber grout float to get rid of the excess grout. Once dried, you can now see how it looks like and if you chose the right color.

  1. Finish the Floor

If you are pleased with your choice of color, proceed to apply grout to the remaining part of the floor. Using step 2 and 3 ensure complete the remaining part. Allow it to cool for about 3 hours.

  1. Allow the Grout to Cure

Check the label to see how long it takes for the grout to cure. It could be as little as one day to as many as five days. The label should also have instructions on how to cure grout. Typically, grout requires proper ventilation to fully cure.

  1. Seal the Grout

Now that your grout is cured, the next step is to seal it. This helps to protect your grout from developing cracks, breaks and bacteria build up. Apply the sealant using a thin-tipped applicator.

In case you don’t have an applicator, you can use a sponge to spread the sealant over the grout. After about 10 minutes, wipe off the sealant and reapply it at least once every year.

How Do You Select These Tile Installation Tools?

Tile installation always has the same tool requirements from a grout float tool, trowel, mixer to tile cutters. However, the specification of each of these tools varies depending on the project, setting material, tile type, job size, and tile size. Below are a few things to consider when selecting tile installation tools:

  1. Grout floats

Grout float selection is generally based on the workspace, tile type, and grout composition. 
Remember that a rubber grout float interacts with both the tile and the grout; therefore, you have to consider both while selecting a grout float. For example, a standard grout float is compatible with most types of tiles and cementitious grout.

On the other hand, natural stone requires a specialized grout float. The same applies to epoxy grout as it requires the use of specialized tile float due to its extremely sticky nature.

Also, consider your workspace, especially if you are required to add tiles in hard to reach areas such as under cabinets. Here, an offset grout float will work better due to its unique handle that extends from its end making it easier to maneuver in small spaces.

  1. Mixer

Select a mixer that is slow and steady. Although there are faster mixers that are said to be more efficient, stick to mixers with that have slower rotations. The minimum recommended rotations are 300 RPM.

Slow and steady mixers ensure that the mixture is thoroughly mixed at a consistent rate. Since mixers are powered by electricity, make sure there is an electricity source nearby and also bring an extension cord.

  1. Tile Cutters

Tile cutters are selected based on tile shape, type, and job size. Your choice should also factor in the design of the tile and that of the job site. For example, small jobs to medium sized jobs that require rectangular shaped tiles as the only design will use tile breaker, nippers or tile scorers.

Larger jobs require faster tile cutters such as wet saws. If you are using natural stone, choose a wet saw but if you want circular cuts, opt for angle grinders or tile nippers.

  1. Trowels

Grouting Tile - The Purpose of Laying JointsOne of the key factor to a successful tile installation is achieving proper mortar coverage. Trowels are critical to achieving this. The most commonly used trowel is the square notched trowel.

Not long ago, the ¼ by ¼ inch notch was considered the industry standard but the tiles have grown bigger. Currently, the trend is the bigger the tile, the deeper the notch.

Are There Alternatives to Grout Floats?

Although a grout float is considered to be the primary tool for grout application, there are other alternatives such as a grout bag, putty knife or a sponge and cloth.

If you need any of these tile installation tools, feel free to contact us.