Diamond rubber polishing pads

Description

The ranges of RUBI diamond rubber pads are ideal for roughing and polishing edges, both cuts and surfaces of natural stone and ceramic tile.

The RUBI diamond rubber polishing pads are semi-flexible and their EVA rubber body allows an excellent adaptation to the user's hand. The grip area has a lateral groove that increases the ergonomics of the block and reduces fatigue of the hand during use.

The diamond rubber polishing pads are designed to work manually on areas where access with power tools is very complicated, such as interior angles, hollow areas or corners and for roughing and smoothing chipped or sharp edges.

In order to achieve a good result, both the type of material and the state in which it is found must be taken into account.

RUBI diamond rubber pads can be used dry but wet use is also recommended, either by moistening the plug or providing a source of continuous cooling.

The range of RUBI diamond rubber polishing blocks comes in different granulometry to perform different polishing and finishing tasks. It is very important that in the polishing work a stepwise degradation is carried out using the different grains successively, starting with the largest grain to the smallest.

In the works of roughing and/or smoothing of edges, the movement of the block must go, always, from the top (most visible) to the bottom. This reduces the risk of chipping or material damage.

The functions of the different granulometric are:

#60, #120 and #200 for roughing

#400 for polishing

For a better finish, it is necessary to be more insistent with the larger grains.

The dimensions of the diamond plate of the rubber polishing pads are 2 3/16" x 3 9/16" inches.

The dimensions of the rubber block are 2 5/16" x 3 11/16" x 1 3/16" inches.