ND-180 tile saw | RUBI USA

ND-180 tile saw

Portable cutter, ideal for finishings and renovations.


The ND-180 tile saw falls into the portable cutter category.

Its small size (15.6 x 15.2 x 9.65 in.) and light weight (26.01 lbs) make it an ideal tile saw for carrying out finishes and renovations. Allowing the professional tile installer to make the necessary cuts at all times, in the same workplace, reducing travel, corrections and downtime.

Its low water consumption and the possibility of fitting a work tray (accessory not included) make it one of the cleanest miter saws on the market.

With the ND-180 cutter you can make cuts in ceramic tiles, especially and intensively in ceramic and stoneware tiles.

Its 0.7 HP single-phase motor includes a thermal protector that protects it from moments of excessive force.

The ND-180 is equipped with a 7 in. diameter, CEV type blade for general ceramic tile cutting.

The metal table is adjustable, and can be set to up to 45° to make miter cuts.

The ND-180 tile saw also includes a lateral stop for repetitive cuts and a template for 45° angle cuts.

Those users who prefer better portability and greater protection of this cutter have a version with a transport case that includes a second additional diamond blade. The case can in turn be used as a support table for the ND-180 cutter.

In addition, as part of the strategy, RUBI is continuously researching according to the evolution of materials and based on the requirements received by leading ceramic tile manufacturers worldwide, 30,000 RUBI dealers and more than 40,000 end users registered in Club RUBI. Thanks to all this, the RUBI cleaning, protection and maintenance range is unique in the market, offering a comprehensive solution to the user in having products for all phases of treatment, in addition to the tools necessary for successful implementation.

Main Features

  • Water refrigeration of the blade.
  • With foldable table for miter cutting.
  • Lateral stop to allow repetitive cuts.
  • Guide for 45º cuts.


  • For cutting ceramic tiles, ideal for Floor and Wall tiles.


  • Single-phase motor.
  • For Wall and Floor tiles and other materials
  • Diamond blade Ø7” (180mm) included.
  • With thermic security switch.
  • Model with suitcase, supplied with 2 extra blades. (Ref. 25945, 25964, 24956)
  • Russian legislation EAC
  • European Regulatory Commission
  • TÜV safety rules
  • 2 year warranty


  • The breaking capacities may vary depending on the position of the head, special flanges and disc diameter.
  • Repetitive cuts Repetitive cuts
  • INCH/MM. ruler INCH/MM. ruler
  • Cutting height Cutting height 35 mm
  • Tip-up table for mitring Tip-up table for mitring
  • Tip-up table for mitring Tip-up table for mitring
  • Power Power
  • Cut Length Cut Length

Videos Table Extensions

References and models for ND-180 tile saw

Where to buy

ND-180 120V-60Hz tile saw
  • Ref. - 25963
  • EAN-13 - 8413797259636
  • Cutting length - ∞"
  • Diagonal cutting length - ∞"
  • Cutting height - 1-3⁄8"
  • Mitre cutting length - 8"
  • Power supply - 120V-60Hz.
  • Revolutions per minute - 2800 RPM
  • Outside diameter - 7"
  • With carrying case -
  • Length Width Height (machine overall dimensions) - 15-3/8 x 15 x 9-1/2"
  • Net weight without packaging - 26 lbs.
  • Units per box - 1
  • Units per pallet - 24
  • card_giftcardPoints: 25
  • format_align_justify Show barcode

Product reviews

Sławomir Józef Wysopal
Sławomir Józef Wysopal Wednesday, May 20, 2020
24976 - Tile Saw ND-180 SMART 230V 50HZ

maszyną tnie się dobrze tylko odpowiedni trzeba dobrać tarczę nie ma co oszczędzać i będzie wszystko na piatke

translate Google Translate

Chris Dyson
Chris Dyson Thursday, May 28, 2020
25945 - ND-180 230V-50Hz tile saw with case

The only way this could be made better is if you address the safty cage removal it has the potential to fall into the motor when being remove due to the bolt dropping in so just make it a quick release catch

Manuel Castillo moraleja
Manuel Castillo moraleja Thursday, June 25, 2020
25926 - ND-180 120V-60Hz tile saw

Es una máquina muy versátil para trabajar dentro de casa y muy fácil el traslado , el corte de cerámica le realiza muy bien

translate Google Translate

Luís Bandeira
Luís Bandeira Sunday, October 25, 2020
25925 - ND-180 230V-50Hz tile saw

Máquina com uma excelente relação preço/qualidade. Corte fácil e preciso. Em conjunto com os discos de corte da gama superpro, faz um trabalho perfeito. Como toda a ferramenta,deve ser limpa convenientemente no final do trabalho. Sugestão: é mais fácil desmontar a proteção de plástico e o disco, e só depois retirar a bandeja da água, senão não há como o fazer sem deixar cair água. Não dou as 5* porque não possível utilizar a mesa para fazer o chanfro a 45° na ponta de azulejos com mais de 10cm.

translate Google Translate

Алексей Коржевин
Алексей Коржевин Wednesday, June 23, 2021
25925 - ND-180 230V-50Hz tile saw

Хороший плиткорез спил ровный работает тихо пыли нет совсем подходит для ответственных работ рад что купил

translate Google Translate