SLAB TRANS CONVEYORS | RUBI USA

SLAB TRANS CONVEYORS

Description

RUBI offers a wide variety of conveyors that adapt to the needs of the professional installer, both in terms of load capacities and cost. The SLAB SYSTEM range of conveyors is made up of the models: SLAB TRANS HEAVY DUTY N, SLAB TRANS MINI, SLIM EASY TRANS PLUS and SLIM EASY TRANS. And these are complemented by the accessories SET OF RAILS, SUCTION CUP SUPPLEMENT and SLAB TRANS MINI TABLE SUPPORT. The SLAB TRANS HEAVY DUTY N conveyor is specially designed for handling large-format porcelain sheets and tiles up to 360 cm long and 160 cm cm wide.

The SLAB TRANS HEAVY DUTY N can be used as a complement to the SLIM CUTTER PLUS (G1), SLAB CUTTER G3 and TC-125 (G1) cutting systems and is compatible with the SLAB CARRIAGE.

The SLAB TRANS HEAVY DUTY N conveyor has been designed mainly for the handling of ceramic sheets with thicknesses of 6 mm or more. These materials, in addition to being a challenge due to their volume (surface) are highly heavy, compared to the 3 or 5 mm sheets to which, until now, we were used. The design of the aluminum profiles of the SLAB TRANS HEAVY DUTY N gives it a maximum load capacity of up to 170 kg. The SLAB TRANS HEAVY DUTY N, from RUBI, incorporates a practical transport bag, equipped with wheels, to facilitate both the handling of the equipment and its storage and protection.

It is made up of a set of two extruded aluminum profiles, reinforced, retractable and adjustable, and two perpendicular crosspieces that favor the robustness and stability of the whole set, especially when handling the heaviest parts.

Thanks to the 6 vacuum suction cups with a gray rubber base, the tiler can adjust the fixing points, ensuring the handling of the porcelain sheets without fear of marking the tile surface.

For a correct fixing of the system, we must check that the surface of the sheet is free of dust or other residues.

The set has 4 handles (2 per guide) that can be adjusted and positioned along the entire length of the guide, facilitating and adapting the SLAB TRANS HEAVY DUTY N to each moment and format.

The SLAB TRANS MINI transporter is a single guide system, designed for handling large-format (59" x 59") without risk of breakage thanks to its retractable bar that makes the set more rigid.  It has a maximum load capacity up to 121lbs.

Its flexible vacuum suction cups adhere to all kinds of surfaces, while the soft-grip handle provides

more grip and stability. Load weights more safely and speed up your work with the minimum daily weight increase.

SLAB

TRANS MINI is the tool that adapts to the dimensions that your work needs.

The SLIM EASY TRANS PLUS transport system has been designed for handling porcelain sheets with a maximum thickness of 6 mm. Thanks to the system of retractable reinforced aluminum profiles, the SLIM EASY TRANS PLUS conveyor can handle porcelain sheets up to a maximum length of 320 cm. These retractable profiles can be adjusted, in length, from 170 cm to a maximum of 320 cm.

The handles, also adjustable, incorporate SOFTGRIP handles for greater ergonomics and comfort during handling. The handles of the SLIM EASY TRANS PLUS transporter slide in and out through the upper slot of the retractable guides, making it easy to store and transport the entire system.

The transport capacity of the SLIM EASY TRANS PLUS is 80 kg, but if the SLIM EASY TRANS RAIL SET (ref. 18819) is added, the load capacity increases to a maximum of 120 kg. With the use of the CROSSMEMBER SET (ref. 18819) on the SLIM EASY TRANS PLUS transporter, the system is made compatible with the SLAB TRANSPORTER TROLLEY (ref.18934).

The SLIM EASY TRANS PLUS transporter incorporates 6 vacuum suction cups with a diameter of 20 cm and a high load and holding capacity. The suction cups can slide and configure their position according to the format of the porcelain sheet. The vacuum suction cup provides a plus of security and reliability in fixing the material. The SLIM EASY TRANS transport system is specially designed for handling large-format, thin-thickness porcelain sheets up to 320 cm in length.

The SLIM EASY TRANS can be used as a complement to the cutting systems for ceramic sheets: SLIM CUTTER PLUS (G1), SLAB CUTTER G3 and TC-125 (G1).

It is made up of a set of two extruded aluminum guides, retractable and adjustable from 160 to 320 cm.

Thanks to the 10 holding suction cups, the installer can adjust the fixing points, ensuring the correct handling of the porcelain sheets. For a correct fixing of the system, we must check that the surface of the sheet is free of dust or other residues. The suction cups of the SLIM EASY TRANS transporter adapt to both smooth surfaces and rough or slightly structured surfaces.

The set has 4 handles (2 per guide) that can be adjusted and positioned along the entire length of the guide, facilitating and adapting the SLIM EASY TRANS to each moment and format.

The load capacity of the set is 60 kg. (standard equipment), but it can be extended up to a maximum of 110 kg, incorporating, for every extra 10 kg, two additional suction cups.

It is important to note that the load capacity of SLAB SYSTEM conveyors is total, so it cannot be exceeded in any case.

When talking about such high weights, and always taking into account that we must add the weight of the transporter itself to the handling, consideration must be given to not exceeding the maximum single-person load. Therefore, in some cases, 3 or 4 operators will be necessary to enjoy safe handling.

The vacuum suction cup supplement is a replacement for the RUBI SLAB TRANS HEAVY DUTY N transporter. The use of this spare part allows the vacuum suction cups of the SLAB TRANS HEAVY DUTY N conveyor to be replaced, maintaining, at all times, the original maximum load capacity of the conveyor itself. The vacuum suction cup allows you to fix the SLAB TRANS HEAVY DUTY N conveyor to any type of surface (smooth, rough or structured).

The vacuum suction cup supplement for SLAB TRANS HEAVY DUTY N is sold separately and individually.

NOTE: Adding more suction cup inserts to the SLAB TRANS HEAVY DUTY N does not increase the original maximum load of 170 kg. NOTE: Adding more suction cups does not increase the maximum load capacity of the SLIM EASY TRANS PLUS carrier. The suction cups of the SLIM EASY TRANS PLUS transporter are not compatible with the SLIM EASY TRANS transporter (ref. 18910), nor are the suction cups of the SLIM EASY TRANS compatible with the SLIM EASY TRANS PLUS.


References and models for SLAB TRANS CONVEYORS


Where to buy

SLAB TRANS HEAVY DUTY N
  • Ref. - 18982
  • EAN-13 - 8413797189827
  • Length Width Height (machine overall dimensions) - 380x170x23,7 cm
  • Net weight without packaging - 35,4 kg
  • Units per box - 1
  • Units per pallet - 1
  • card_giftcardPoints : 317
  • format_align_justify Show barcode
    close
SLIM EASY TRANS PLUS
  • Ref. - 18976
  • EAN-13 - 8413797189766
  • Length Width Height (machine overall dimensions) - 1654x254x228 cm
  • Net weight without packaging - 24 kg
  • Units per box - 1
  • Units per pallet - 1
  • card_giftcardPoints : 193
  • format_align_justify Show barcode
    close
SLIM SYSTEM EASYTRANS transport system
  • Ref. - 18910
  • EAN-13 - 8413797189100
  • Net weight without packaging - 36.6 lbs.
  • Units per box - 1
  • Units per pallet - 12
  • card_giftcardPoints : 107
  • format_align_justify Show barcode
    close
SLAB TRANS N SUPPLEMENT VACUUM SUCTION CUP
  • Ref. - 18979
  • EAN-13 - 8413797189797
  • Units per box - 1
  • Units per pallet - 1
  • card_giftcardPoints : 23
  • format_align_justify Show barcode
    close
SLAB TRANS MINI
  • Ref. - 18983
  • EAN-13 - 8413797189834
  • Length Width Height (machine overall dimensions) - 231x26x18 cm
  • Net weight without packaging - 8,3 kg
  • Gross weight - 11,2 kg
  • Units per box - 1
  • card_giftcardPoints : 71
  • format_align_justify Show barcode
    close
SLAB TRANS MINI SUPPORT FOR TABLE
  • Ref. - 16909
  • EAN-13 - 8413797169096
  • Units per box - 1
  • card_giftcardPoints : 15
  • format_align_justify Show barcode
    close
SLIM EASY TRANS supplementary guide set
  • Ref. - 18819
  • EAN-13 - 8413797188196
  • Units per box - 1
  • card_giftcardPoints : 46
  • format_align_justify Show barcode
    close