Accessories for rubble chutes

Accessories for rubble chutes

Rubber and plastic products

info
closeChute control ring

The RUBI-KANGURO chute control ring is an accessory that is adaptable to the last section of the rubble chute column.This accessory allows the last sections of the column to be easily manoeuvred into the desired position, aiming and controling the exact point of discharge of rubble at all times.

info
closeBalance beam column hook

The balance beam column hook is an accessory that is compatible with the bracket and winch.The main function of the RUBI-KANGURO balance beam column hook is to balance the fastening of the sections that make up the rubble chute column during the assembly and disassembly of the column.

info
closeTop metal hopper for rubber chute

Metal hopper accessory for "RUBCHUTE" rubber chute upper discharge.With the metal hopper, professionals can turn a straight section of a "RUBCHUTE" rubber chute into a top segment.Once the metal hopper is installed in the "RUBCHUTE" straight section it is essential to connect the chains of the metal hopper to the hooks of the straight section.

info
closeExtension arms support brackets

RUBI-KANGURO has a wide selection of accessories for all of its rubble chutes.Extension arms for the RUBI-KANGURO rubble chute support bracket allow for extra fastening using props or counterweights.The RUBI-KANGURO range of accessories for rubble chutes is designed to facilitate the assembly and disassembly of rubble chute columns, while ...

info
closeBracket and winch

Attachable to the support bracket and the scaffold fastening system, the RUBI-KANGURO bracket and winch accessory facilitates the installation and disassembly operations for columns of a maximum 12 chutes.The RUBI-KANGURO bracket and winch accessory includes a manual winch with 15 metres of cable, equivalent to the length of 12 chutes.

info
closeChainset

The RUBI-KANGURO rubble chute chain set comprises two units and allows users to extend the built-in chains in each section of chute.The RUBI-KANGURO auxiliary rubble chute chains are extra-reinforced, with links of 7 mm in diameter, and they comply with the DIN 763 standard.The RUBI-KANGURO rubble chute chain set includes 2 safety karabiners to ...

info
closeDust reducer

Within the accessories for the ranges of RUBI - KANGURO rubble raisers, the construction professional can find the dust reducer.This simple element has been designed to prevent the leakage of dust between sections of chutes, which can be generated by pulling all the debris through them.

info
closeScaffold fastening system

RUBI-KANGURO has a wide selection of accessories for all of its rubble chutes.Adaptable to both the "RUBCHUTE" rubber models and the "LIGHTCHUTE" plastic models, the RUBI-KANGURO chute scaffold fastening system is the first anchoring segment of any chute column and allows them to be fixed to the metal structure of a scaffolding system more ...

info
closeSupport bracket for buildings

RUBI-KANGURO has a wide selection of accessories for all of its rubble chutes.Adaptable to both the "RUBCHUTE" rubber models and the "LIGHTCHUTE" plastic models, the RUBI-KANGURO rubble chute support bracket is the first anchoring segment for all chute columns. It llows them to be fixed to a floor slab, both horizontally and vertically (window or ...

MORE INFORMATION


RUBI-KANGURO has a wide selection of accessories for your rubble chutes.

Adaptable to both the "RUBCHUTE" rubber models and the "LIGHTCHUTE" or "RUBITECH" plastic models, RUBI-KANGURO accessories for rubble chutes allow them to be anchored to a floor slab, both horizontally and vertically, and to scaffolding more quickly, safely and comfortably. For added safety, a support bracket should be installed per every 15 metres of rubble chute column.

Within the range of accessories for rubble chutes, RUBI-KANGURO highlights, in addition to the various support brackets for both steel work and for scaffolding, the bracket with winch. This RUBI-KANGURO accessory for rubble chutes is ideal for the assembly and disassembly of chute columns of up to 15 metres high and adapts easily to steel work and scaffolding supporting brackets.

With this accessory for rubble chutes, there is no need to use cranes or additional lifting systems.

The RUBI-KANGURO range of accessories for rubble chutes is designed to facilitate the assembly and disassembly of rubble chute columns, while facilitating their use, and ensuring at all times the maximum safety for users and the surroundings in which they have been installed.

All materials used in the manufacture of RUBI-KANGURO accessories for rubble chutes are top quality and meet the brand’s most stringent requirements.

The whole RUBI RDI team of engineers and professionals from all around the world has been vital in the design of all RUBI products. The fact that we receive information from many parts of the world gives us the opportunity to have a global view of business and of the needs of professionals in the construction industry, to be able to design tools adapted to each market.