Manual cutters for ceramic tiles

Manual cutters for ceramic tiles

Manual cutting

info
closeTX-MAX Manual Cutters

Range of professional manual cutters for the intensive cutting of all types of ceramic tiles, ideal for porcelain tiles (BIa - AIa), extruded stoneware tiles (AIb), and angular cuts from 0º to 45º.

info
closeTZ Manual Cutters

Professional manual cutters with double guide and multi-point separator of 1500 kg of power and pivoting set square for angular cuts. Ideal for intensive cutting of all types of tiles and ceramics.

info
closeTR-MAGNET manual cutters

When we talk about TR-MAGNET manual cutters, we highlight your moving separator. Thanks to this type of separator, TR-MAGNET manual cutters are suitable for diagonal cuts.

info
closeManual cutters TQ

Ideal for PROFESSIONAL cutting of porcelain stoneware (AIa / BIa), INTENSIVE tile (BIII) and enamelled stoneware (BIIa). Mono-guide system with MAGNET multi-point separator, operable with only one hand.

info
closeTP-T manual cutters

Each market has its own needs which is why RUBI has the range of TP-T manual single guide cutters.These manual cutters are designed for intensive work with any type of ceramic tile.TP-T manual cutters are ideal for cutting porcelain tiles (BIa type). They include a highly impact-resistant monoguided system, which gives them a very long life.

info
closeTP-S manual cutters

Each market has its own needs which is why RUBI has the range of TP-S manual single guide cutters.These manual cutters are designed for intensive work with any type of ceramic tile.TP-S manual cutters are ideal for cutting porcelain tiles (BIa type). They include a highly impact-resistant monoguided system, which gives them a very long life.

info
closeTS-MAX Manual Cutters

The TS-MAX range of manual cutters offers the professional a simple and functional tool. TS-MAX RUBI manual cutters are suitable for intensive cutting of ceramics and frequent cutting of porcelain.

info
closeSPEED-MAGNET manual cutters

The range of SPEED-MAGNET hand cutters is designed for frequent cutting of all types of ceramics and is indicated for the professional setter looking for a versatile manual cutter.

info
closeSPEED-N manual cutters

The range of SPEED-N manual cutters allows the frequent cutting of glazed tiles and stoneware and occasionally of porcelain tiles. Without a doubt, a most versatile manual cutter

info
closeFAST Manual cutters

FAST tile cutters are lightweight thanks to their new base, made of extruded aluminum, and are very versatile in cutting various types of ceramic tiles, due to their structural strength and breaking power.

info
closeSTAR manual cutters

The STAR range of tile cutters is suitable for cutting glazed stoneware, ceramic tiles and occasionally porcelain tiles. Equipped with mobile breaker for diagonal cuts and a base with shock absorption effect.

info
closePOCKET manual cutters

Lightness and functionality in the smallest space.The POCKET range of manual cutters are perfect for cutting stoneware and ceramic tiles.The practical and compact design of POCKET manual cutters, their folding bases, which allow us to save space and improve transport, as well as their aluminium structure make them the perfect tools for light work ...

info
closeBASIC manual cutters

Ideal for small renovations and light work, RUBI BASIC manual cutters are recommended for cutting stoneware and ceramic tiles.With a maximum cutting thickness of 10 mm, thanks to their versatile 14 mm roller guides made of tungsten carbide, RUBI BASIC manual cutters can provide highly satisfactory results for building renovators.

info
closePRACTIC manual cutters

The PRACTIC range of manual cutters is ideal for cutting stoneware and ceramic tiles.PRACTIC manual cutters by RUBI perfectly cover the needs of the tile fixer in light work and minor renovations, especially those with a medium-low workload and for materials less than 10 mm thick.

info
closeHIT-N manual cutter

They are ideal for PROFESSIONAL cutting of all types of ceramic tile, HIT-N manual cutters incorporate a 800 kg multipoint separator with the RUBI revolutionary MAGNET system.

info
closeGENIUS-CUT manual cutters

The GENIUS-CUT manual cutters are precise and versatile, with two available models, 65 and 85, covering the main needs of ceramic tilers.The Ø 20 mm steel guides, chrome-plated and ground, of the GENIUS-CUT manual cutters and the slides, equipped with linear bearings, guarantee a smooth and precise scratching.

info
closePRIME CUT MAGNET Manual Cutter

Thanks to the original RUBI MAGNET system, the PRIME-CUT cutters allow the professional ceramic tile setter to be used with one hand. Thus increasing the speed of work and obtaining a greater work performance.

info
closeSTAR PLATINUM manual cutters

STAR PLATINUM tile cutters have been conceived as a versatile and lightweight alternative perfectly adaptable for handling ceramic and occasional porcelain stoneware tiles.

MORE INFORMATION


RUBI invented the first manual cutter in 1951 as a solution to cement tile cutting. It's been 65 years since then and RUBI continues to lead and innovate in the manufacture of manual tile cutters. RUBI offers professional ceramic tile fixers the widest range of manual cutters on the market, along with a great variety of tools and equipment for the installation of ceramic tiles, designed to meet all their needs.

RUBI manual ceramic cutters are adapted to the specific needs of each market, offering everything tile fixers look for, no matter where they come from or what material they are using. We offer different types of machines regarding the way the manual tile cutting machine separates the two pieces of ceramic: single point (fixed mechanism, independent from scoring assembly) or multipoint (the breaker is part of the scoring assembly); we also offer a great variety of models to make cuts in ceramic tiles of different typologies, sizes and thicknesses, each of them designed with a different kind of user in mind. Thus, RUBI includes both dual and single guide manual cutters for ceramic, in order to adapt to every user's needs.

RUBI's developments and innovations have no stop. Our machines and tools are continuously improved and enhanced in both design and features. We are in constant contact with professional tile fixers to receive feedback about our products, in order to achieve the goal of making the work of a tile fixer easier each day. Manual tile cutters, for instance, are made thinking solely and exclusively of the fixer.

Thanks to the work and cooperation of all the company departments and the great loyalty of our customers, scattered all around the world, we are aware of the demands and specific needs of each market. For these reasons, we design and manufacture products and tools that are tailored to each type of market and that meet the needs of the professional.

All RUBI ceramic cutters are designed by the RDI department, based on the needs of professional tile fixers, only using resistant materials that offer proven strength and lasting work quality.

It should be noted that in the process of creating our tools is included a test period in real work situations in certain domestic and international markets, conducted by a group of trusted professionals in the industry. This action allows us to identify areas of improvement in our products before putting them on sale and/or adapting them to the needs of the end-user. That way none of our products is released into the market without proper testing and prototyping, therefore end users will always get reliable and high quality products at a very attractive price.

Another aspect we always have in mind is safety, since the manual ceramic cutters are very safe tools, due to the fact that they do not contain sharp parts that may come into contact with the user or high speed mobile parts that may put in danger tile fixer's hands or limbs, besides they don’t need electricity to work.