Diamond grinding blades

Diamond grinding blades


closeVACUUM BRAZED diamond grinding blades

Ideal for roughing work on natural stone surfaces and edges, all types of ceramic tiles, paint or resin coatings, VACUUM BRAZED diamond blades are available in two different granulometries: coarse and fine.The VDG coarse finish blades facilitate the shaving of surfaces and the moulding of edges to give them the desired shape.


Range of discs in 2 sizes with diamond blades for grinding ceramic tile, porcelain stoneware, sintered stone and natural stone. Recommended for both edges and small surfaces.


RUBI, as a brand specialized in diamond tools, offers to the professional tiler this range of diamond blades for roughing works.

Thanks to the technique of VACUUM BRAZING, RUBI has developed its line of diamond blades for roughing.

The roughing of surfaces or finishes of edges and sharp edges is a job that requires, not only a skilled and experienced professional, it also requires the use of the best specialized tools.

Within the range of diamond blades for roughing, the professional can find different granulometries to obtain very varied levels of finishes.

Using correctly the different granulometries will allow us to achieve that the worked surfaces are smooth and homogeneous. Obtaining thus, the desired results and the best performance of our products.

The coarser grain of the diamond blades for the roughing must be used for the recessing or levelling of surfaces, or for the elimination of coatings (paints, glues, etc.).

The finer grain of the diamond blades for the roughing is the recommended one to initiate a polishing process and is complementary to the flexible pads for the polishing of surfaces of natural stone or concrete.

With the diamond blades for roughing, we can make rectified edges and sharp edges in any type of ceramic tile or slab of natural stone. We must keep in mind that some materials, with glazed finishes or with bodies made of different materials or colours, it may not be advisable to work on these; since the roughing can leave some less aesthetic surfaces.

For grinding work on large surfaces, RUBI diamond grinding blades are the solution for those areas (perimeters, corners, etc.) where the machines for industrial use cannot reach.

For more than 65 years, RUBI has only manufactured products with high durability and resistance, to give the best performance in the toughest working conditions and adapting to the demands of each market.