Description

Not all ceramic materials are the same. For that reason, not all RUBI scoring wheels are the same.

RUBI manufactures its tungsten carbide wheels, whose main characteristic is its high resistance to friction wear. Most of the ceramic materials that, historically, have been used for surface coating, have used enamels and smooth finishes and, with minimal roughness. With the appearance of non-slip materials or rustic stoneware (especially suitable for outdoor), the roughness of the ceramic was increased. To minimize the impact of this roughness, on its surroundings, RUBI, designs the GOLD range.

Each wheel is rectified in a unit manner so that each diameter has an incision angle according to its function and use. Each diameter of wheel offers different results and yields, depending on the type of ceramic material for which they were designed.

The recommended use of the RUBI GOLD Scoring wheel is in the scoring  of glazed stoneware (BIIa / BIb), rustic or extruded stoneware (AIIa / AIb) and porcelain stoneware (BIa) with smooth and / or slightly rough finishes.

The range of GOLD scoring wheels  increases the wear resistance of tungsten carbide by means of a titanium coating. Thanks to this treatment, RUBI GOLD wheels  offer a superior life than SILVER wheels. This increase in life, under the same conditions of use as a SILVER, this increase can be up to 50% more over the life of a SILVER.

RUBI GOLD wheels use a shaft with a triple grooved geometry (design and RUBI patent), which guarantees, at all times, a correct assembly on the manual cutter, as well as a firm fixation and firm and vibration-free scratching. Forming the best combination to always obtain the best results.


References and models for GOLD scoring wheels


Where to buy

10 mm PLUS Scoring wheel GOLD
  • Ref. - 1993
  • EAN-13 - 8413797019933
  • Units per box - 10
  • Units per pallet - 3600
  • card_giftcardPoints: 3
  • format_align_justify Show barcode
    close
10mm Scoring wheel GOLD
  • Ref. - 1949
  • EAN-13 - 8413797019490
  • Units per box - 10
  • Units per pallet - 4600
  • card_giftcardPoints: 2
  • format_align_justify Show barcode
    close
22 mm PLUS Scoring wheel GOLD
  • Ref. - 1965
  • EAN-13 - 8413797019650
  • Units per box - 10
  • card_giftcardPoints: 4
  • format_align_justify Show barcode
    close
22mm Scoring wheel GOLD
  • Ref. - 1964
  • EAN-13 - 8413797019643
  • Units per box - 10
  • card_giftcardPoints: 4
  • format_align_justify Show barcode
    close

rate_review
Product reviews

Aziz Lourimi
Aziz Lourimi Wednesday, 17 October 2018
1964 - 22mm Scoring wheel GOLD

Molette au top. Facile à utiliser coupe très bien, on a pas besoin de forcer. Idéal pour les grands formats de Carrelage notamment les 60x60.

translate Google Translate

1964 - 22mm Scoring wheel GOLD
Tomasz Ziecina
Tomasz Ziecina Thursday, 19 September 2019

Bardzo dobrze tnie wszystkie rodzaje płytek. Świetnie nadaje się do gresu Polecam zakup tego noża

translate Google Translate

Jesse Dallas
Jesse Dallas Thursday, 16 July 2020

Rubi wheels are nice, the “ gold” or titanium scoring wheels are even better! Stays sharper longer and cuts cleaner. Put this in your TZ and smoke it

Jesse Dallas
Jesse Dallas Thursday, 16 July 2020

The big , bearing wheels can really transfer a meaningful score on the thick stuff without any negative feedback. Every installer should have one or two in their case as they are sometimes better than the smaller wheels with some tile; try one out if you are having trouble.

David Goncalves
David Goncalves Monday, 24 August 2020
1949 - 10mm Scoring wheel GOLD

Le top pour des coupes tres belle finitions rebuste facile a installer sur mais carrelette produit de tres bonne qualite et dur dans le temps

translate Google Translate