Description

Not all ceramic materials are the same. For this reason, not all RUBI scoring wheels are created equal.

RUBI manufactures its wheels and rollers in tungsten carbide, whose main characteristic is its high resistance to friction wear. Most of the ceramic materials that, historically, have been used for surface coating, have used enamels and smooth finishes, with minimal roughness. With the appearance of non-slip materials or rustic stoneware (especially suitable for outdoors), the roughness of the ceramic was increased. To minimize the impact of this roughness on the wheels, RUBI designs the GOLD  category of scoring wheels and rollers.

Each roller is rectified in a unitary way so that each diameter has an incision angle according to its function and use. Each roller diameter offers different results and performances, depending on the type of ceramic material for which they have been designed.

The recommended use of RUBI GOLD scoring wheels is for scratching glazed stoneware (BIIa / BIb), rustic or extruded stoneware (AIIa / AIb) and porcelain stoneware (BIa) with smooth and / or slightly rough finishes.

The GOLD range of scoring wheels increases the resistance to natural wear of tungsten carbide, through a titanium coating. Thanks to this treatment, RUBI GOLD rollers offer a superior life than SILVER scoring wheels and rollers. This increase in life, under the same conditions of use as a SILVER wheel, this increase can be up to 50% more than the life of a SILVER wheel.

The RUBI GOLD scoring wheels use a handle with a triple grooved geometry (design and RUBI patent), which guarantees, at all times, a correct assembly in the manual cutter, as well as a firm fixation and firm scratching and without vibrations. Conforming the best combination to always obtain the best results.


References and models for GOLD Scoring Wheels


Where to buy

3/8" (10 mm) PLUS Scoring wheel GOLD
  • Ref. - 1993
  • EAN-13 - 8413797019933
  • Units per box - 10
  • Units per pallet - 3600
  • card_giftcardPoints: 3
  • format_align_justify Show barcode
    close
3/8" (10 mm) Scoring wheel GOLD
  • Ref. - 1949
  • EAN-13 - 8413797019490
  • Units per box - 10
  • Units per pallet - 4600
  • card_giftcardPoints: 2
  • format_align_justify Show barcode
    close
7/8" (22 mm) PLUS Scoring wheel GOLD
  • Ref. - 1965
  • EAN-13 - 8413797019650
  • Units per box - 10
  • card_giftcardPoints: 4
  • format_align_justify Show barcode
    close
7/8" (22 mm) Scoring wheel GOLD
  • Ref. - 1964
  • EAN-13 - 8413797019643
  • Units per box - 10
  • card_giftcardPoints: 4
  • format_align_justify Show barcode
    close

rate_review
Product reviews

Aziz Lourimi
Aziz Lourimi Wednesday, October 17, 2018

Molette au top. Facile à utiliser coupe très bien, on a pas besoin de forcer. Idéal pour les grands formats de Carrelage notamment les 60x60.

translate Google Translate

1964 - 7/8
Tomasz Ziecina
Tomasz Ziecina Thursday, September 19, 2019

Bardzo dobrze tnie wszystkie rodzaje płytek. Świetnie nadaje się do gresu Polecam zakup tego noża

translate Google Translate

Jesse Dallas
Jesse Dallas Thursday, July 16, 2020

Rubi wheels are nice, the “ gold” or titanium scoring wheels are even better! Stays sharper longer and cuts cleaner. Put this in your TZ and smoke it

Jesse Dallas
Jesse Dallas Thursday, July 16, 2020

The big , bearing wheels can really transfer a meaningful score on the thick stuff without any negative feedback. Every installer should have one or two in their case as they are sometimes better than the smaller wheels with some tile; try one out if you are having trouble.

David Goncalves
David Goncalves Monday, August 24, 2020

Le top pour des coupes tres belle finitions rebuste facile a installer sur mais carrelette produit de tres bonne qualite et dur dans le temps

translate Google Translate

Łukasz Saletnik
Łukasz Saletnik Friday, September 11, 2020

Kółko Dobrze sprawdza się w gresie. Zobaczymy jak z wytrzymałością bo narazie dużo nie wykorzystywał go. Zapowiada się dobrze.

translate Google Translate