Description

The RUBI spacers are, without any doubt, a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile.

RUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.

The spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The massive structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make cross joints for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with ceramic tiles of large formats.

The L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large-format or rectified ceramic tiles, with a thin joint.

The internal geometry of the spacers for joints of 3 mm long and 4 mm has been designed to provide greater resistance to bending and crushing. These properties make the spacers for joints of 3 mm long are highly recommended for coatings with large format ceramic tiles.

The internal geometry of the joints for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation permits, leave the spacers inside the installation joint without affecting the integrity of the joint in the future.

The RUBI reinforced 5 mm spacers are crosspieces with greater rigidity, specially designed for use on large-format floor tiles. The underside of the reinforced 5 mm spacers is designed to offer a good settlement in the grip material and to facilitate, if the type of installation allows it, the crosshead is inside the installation joint without this being able to affect the integrity of it in the future.

The professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.

The RUBI spacers stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who trust in RUBI spacers, T and wedges to obtain excellent finishes and with total precision.

RUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.

Features

  • Higher rigidity spacer specially designed for use with large format coatings. Quality base material, without impurities or imperfections. Underside designed for good bonding to the bonding material.
  • Spacers for large format and rectified ceramics.
  • Spacers for rustic and large format tiles.
  • Tile spacer for floor tiles with thin joint.
  • Spacer for rustic and industrial formats.
  • Spacers for pavements.
  • For wall & floor tiles with minimum joint.
  • Spacers for joints
  • Hollow structure with internal reinforcements. Supports the tensions and allows to leave into the joint and to grout over.
  • Redesigned internal geometry. Greater resistance to bending and flattering.
  • Ideal for large format vertical coatings.
  • Ideal for large format vertical coatings.
  • Quality base material, without impurities or imperfections.

References and models for Spacers for joints


Where to buy

Tile spacers for 3/32" (2 mm) joints. (B-300 u.)
  • Ref. - 2901
  • EAN-13 - 8413797029017
  • Units per box - 10
  • Units per pallet - 1680
  • card_giftcardPoints: 1
  • format_align_justify Show barcode
    close
Ceramic Tile Spacers for 3mm-L (Bag 600 U.) USA
  • Ref. - 2831
  • EAN-13 - 8413797028317
  • Units per box - 12
  • Units per pallet - 288
  • card_giftcardPoints: 2
  • format_align_justify Show barcode
    close
Tile spacers for 1/32" (1 mm) joints. (B-300 u.)
  • Ref. - 2911
  • EAN-13 - 8413797029116
  • Units per box - 10
  • Units per pallet - 1200
  • card_giftcardPoints: 1
  • format_align_justify Show barcode
    close
Tile spacers 1/8" (3mm) JAR (1000 pc.)
  • Ref. - 2281
  • EAN-13 - 8413797022810
  • Units per box - 1
  • card_giftcardPoints: 2
  • format_align_justify Show barcode
    close
Tile spacers for 1/4" (6 mm) joints. (B-100 u.)
  • Ref. - 2036
  • EAN-13 - 8413797020366
  • Units per box - 10
  • Units per pallet - 540
  • card_giftcardPoints: 1
  • format_align_justify Show barcode
    close
Tile spacers for 1/8" (3 mm) joints. (B-200 u.)
  • Ref. - 2902
  • EAN-13 - 8413797029024
  • Units per box - 10
  • Units per pallet - 1200
  • card_giftcardPoints: 1
  • format_align_justify Show barcode
    close
Tile spacers for 1/16" (1.5 mm) joints. (B-300 u.)
  • Ref. - 2912
  • EAN-13 - 8413797029123
  • Units per box - 10
  • Units per pallet - 960
  • card_giftcardPoints: 1
  • format_align_justify Show barcode
    close
Tile spacers 3/16" (5mm) JAR (400 pc.)
  • Ref. - 2282
  • EAN-13 - 8413797022827
  • Units per box - 1
  • card_giftcardPoints: 2
  • format_align_justify Show barcode
    close
Tile spacers 1/16" (1.5mm) JAR (1000 pc.)
  • Ref. - 2280
  • EAN-13 - 8413797022803
  • Units per box - 1
  • card_giftcardPoints: 2
  • format_align_justify Show barcode
    close
Tile spacers for 3/16" (5 mm) joints. (B-100 u.)
  • Ref. - 2903
  • EAN-13 - 8413797029031
  • Units per box - 10
  • Units per pallet - 960
  • card_giftcardPoints: 1
  • format_align_justify Show barcode
    close

rate_review
Product reviews

Krzysztof Żak
Krzysztof Żak Monday, January 28, 2019

Dobre ale przydał by się jakiś wypust za który można by wyciągać krzyżyk z fug co ułatwiło by szybkość pracy i zapewniało bezpieczeństwo dla krawędzi płytek

translate Google Translate

Adilia da Conceição Vieira Pinto
Adilia da Conceição Vieira Pinto Friday, June 7, 2019

Ja usei outras marcas e era muito frageis, descartaveis mesmos... estas duram muito mais tempo pois sao bem mais resistentes.

translate Google Translate

Robert Świetlik
Robert Świetlik Wednesday, May 20, 2020

Polecam krzyżyki firmy Rubi bo są proste i równe i ich powtarzalność jest taka sama a nie jak markietowki lepiej wydać parę groszy więcej i się nie wkurzac pozdrawiam

translate Google Translate

RUBI - Tile Leveling System Calculator

Tile Leveling System Calculator

*Approximate calculation without considering perimeter or intermediate partitions of the surface to tile.