TX-MAX Tile Cutter

Professional manual cutter, with high-performance multipoint breaker.

Description

The range of TX-MAX professional manual cutters are perfect for INTENSIVE cutting of all types of ceramic tile. Thanks to its high performance MULTIPOINT separator and its rotating square system, TX-MAX models allow easy and quick execution of angular cuts (from 0º to 45º), especially in porcelain stoneware tiles (AIa / BIa). Its high separation power (up to 1200 kg) allows the TX-MAX cutters to have an excellent behavior with extruded stoneware. Tubular steel guides of 30 mm in diameter and the head with extra-long aluminum slides give an impressive structural robustness, making the most of the models with the highest cutting capacity (TX-1020 MAX and TX-1250 MAX).

The advanced position of the rivet increases the visibility during scratching and separation, and the gripper incorporates a protective, removable, which allows to work on the most delicate surfaces without risk of leaving marks.

The separator mechanism allows the use with one hand, facilitating the locking and unlocking of the gripper by means of a ratchet and trigger system. This system increases the performance of work, both in the materials of low thickness as in those of greater thickness (from 3 to 21 mm without the protector, and up to 19 with the anti-marking protector that includes the trap).

As a complement to the floating table system, the 710 and 1020 models are equipped with two additional side arms, to increase the support surface with large-format tiles. The 1250 model has 4 arms (two on each side). All models of the TX-MAX range include a lateral stop for the measurement and blocking of repetitive narrow cuts and strips, as well as two cords (8 mm and 22 mm EXTREME) and the traditional case suitcase. The TX-MAX manual cutters are compatible with the full range of RUBI PLUS cords.

The model TX-1250 MAX includes, in addition to the suitcase, handle and wheels to facilitate its portability in the workplace. * There are some ceramic materials, with thicknesses exceeding 15 mm, which due to their physical characteristics, possible internal tensions or finishes, present difficulties to be cut manually. It is advisable to make some sample cuts to determine the compatibility of the product.

Main Features

  • Breaker’s lock system and unlocking system by trigger increases performance in both cases: thick and thin materials.
  • Ø30 mm tubular steel guides with 2 mm wall thickness.
  • Reinforced components. High robustness
  • High separation power (1,200 kg) - MASTER POWER. Operable with only one hand.

Materials

  • For intensive cutting of all types of ceramic tile, ideal for porcelain tiles and extruded tiles.

Features

  • Tubular steel guides Ø30 mm x 2 mm in wall thickness.
  • Head with aluminum slides, extra-long, with "self-lubricated" friction bushes.
  • Mobile separator with aluminum clamp, equipped with plastic protector to AVOID marking on the most DELICATE surfaces.
  • The locking of the gripper, by ratchet mechanism, and unlocking, by trigger, allows scratching and separating with one hand. Greater SPEED of use. Increase PERFORMANCE in both thin and thick materials.
  • Better VISIBILITY of the area of scratching and cutting.
  • Aluminum injection base, reinforced by central rib, for greater ROBUSTNESS.
  • Galvanized steel floating tables, increases the STABILITY in the cut.
  • Revolving square, central pivot. Greater PRECISION in the angular cuts.
  • With lateral stop for repetitive cuts and narrow strips.
  • Equipped with 2 supplementary arms *, for large format ceramics. (* 4 on model TX-1250 MAX).
  • Handle with soft grip grip for greater ERGONOMICS and COMFORT.
  • Equipped with 8 mm and 22 mm EXTREME cords. Compatible with the full range of PLUS cords.
  • Includes suitcase-case.
  • 2+3 years warranty

Note

  • *Some materials with a thickness greater than 15 mm may be difficult to cut manually due to physical characteristics, internal tensions and/or finish. We recommend making sample cuts to determine product compatibility and alternatively suggest cutting these types of material using an electric tile cutter.
  • Base accessory Base accessory
  • Separator power Separator power 1200 kg
  • Cutting height Cutting height 3-21 mm
  • One Hand Action One Hand Action
  • Soft Soft
  • Angular measuring Angular measuring
  • Repetitive cuts Repetitive cuts
  • Mobile separator Mobile separator
  • MAGNET MAGNET
  • Patented Patented

References and models for TX-MAX Tile Cutter


Where to buy

TX-1250 MAX Tile Cutter inch.
  • Ref. - 17922
  • EAN-13 - 8413797179224
  • Cutting length - 125 cm
  • Diagonal cutting length - 85x85 cm
  • Cutting height - 3-21 mm
  • Separator power - 1200 kg
  • With carrying case -
  • Weight with carrying case - 26 kg
  • Units per box - 1
  • card_giftcardPoints: 157
  • format_align_justify Show barcode
    close
TX-1020 MAX Tile Cutter
  • Ref. - 17916
  • EAN-13 - 8413797179163
  • Cutting length - 102 cm
  • Diagonal cutting length - 70x70 cm
  • Cutting height - 3-21 mm
  • Separator power - 1200 kg
  • With carrying case -
  • Weight with carrying case - 19,4 kg
  • Units per box - 1
  • card_giftcardPoints: 102
  • format_align_justify Show barcode
    close
TX-710 MAX Tile Cutter
  • Ref. - 17910
  • EAN-13 - 8413797179101
  • Cutting length - 71 cm
  • Diagonal cutting length - 50x50 cm
  • Cutting height - 3-21 mm
  • Separator power - 1200 kg
  • With carrying case -
  • Weight with carrying case - 13,3 kg
  • Units per box - 1
  • card_giftcardPoints: 92
  • format_align_justify Show barcode
    close

rate_review
Product reviews

Poenaru Aurel
Poenaru Aurel Wednesday, June 19, 2019

Unne tres bonne coupe carrelage, je utilisé beaucoup de coupe carrelage, sigma, monolit, et meilleure que la rubi tx max il y a pas.... coupe propre, facilite en la separation, je peut vous dire que se une jeu de enfants,

Ryszard Danielewicz
Ryszard Danielewicz Thursday, August 8, 2019

Maszyna do cięcia płytek jest genialna, płytki tnie idealnie, można nią docinać wszystkie rodzaje płytek, jednak daję 4 gwiazdki przez to że jakość materiału z jakiego jest wykonana nie jest najlepsza. Po około 4 łazienkach (farba odpryskuje od prowadnicy), bardzo szybko się rysuje podczas używania jak i transportu.

translate Google Translate

Fryderyk Malczyk
Fryderyk Malczyk Tuesday, September 3, 2019

Wspaniały sprzęt. Nie próbowałem jeszcze ciąć płytek chodnikowych , jestem jednak przekonany że dla tej maszyny to pestka. A tak poważnie, to wysoka precyzja ciecia, solidna konstrukcja w wygodnej walizce. Kupilem ją z myślą o większych formatach płytek, teraz używam jej do wszystkich. Tylko stół sobie zrobiłem pod maszynę, szkoda ze nie ma dedykowanego stołu pod sprzęt.

translate Google Translate

Grzegorz Szlęzak
Grzegorz Szlęzak Wednesday, December 4, 2019

Super sprzet polecam.Tnie jak brzytwa.Pierwszy raz używałem wszysko ale innej bym już nie kupił.Polecam.

translate Google Translate

Zan Genorio
Zan Genorio Monday, January 13, 2020
17909 - TX-710 MAX Tile Cutter

Really powerful manual cutter, has no problems cutting tough porcelain. Quick assembly, easy to use. Would recommend it anytime.

Andrew St.Clair
Andrew St.Clair Monday, February 24, 2020

Great for large format stuff...love not having to lug around my bridge saw for 4 ft planks and such...built extremely durable, as expected, takes almost zero force while scoring ( very easy to apply to much force however) . Great tile board..love the grip release for raising cutting wheel before breaking

Xavi
Xavi Wednesday, March 18, 2020

La unión entre la batalla y el detalle. Perfecta para formatos grandes, un ahorro en tiempo del corte línea dejando a un lado los cortes de radial.

translate Google Translate

Michał Szczepanek
Michał Szczepanek Monday, May 4, 2020

Super przecinarka. Stabilna i mocna konstrukcja no i przede wszystkim obsługa jedną ręką. Polecam!!!

translate Google Translate

Krzysztof Bartczak
Krzysztof Bartczak Sunday, May 31, 2020

Byłoby 5 gwiazdek, ale tą jedną zabrałem ponieważ listwa oporowa powinna mieć lepsze rozwiązanie mocowania i pozycjonowania, którą za każdym rażą kiedy wypinam i ponownie montuję muszę kalibrować do kąta 90 stopni. Być może coś źle robię, ale nie sądzę. Po za tym maszynka MEGA SPRAWA.

translate Google Translate

Peter van Dissel
Peter van Dissel Monday, June 1, 2020
17909 - TX-710 MAX Tile Cutter

Goed sterk en rebust. Even wennen aan het breekmechanisme. Vergeet nog wel eens van zn doanning af te halen

translate Google Translate

Szulbud Kompleksowe Wykończenia Wnętrz
Szulbud Kompleksowe Wykończenia Wnętrz Tuesday, June 23, 2020

Rewelacja tylko polecać najlepsza maszynka na świecie ,a miałem już kilka .Sama tnie po prostu REWELACJA

translate Google Translate

17915 - TX-1020 MAX Tile Cutter