SLAB CUTTER G3 | RUBI USA

SLAB CUTTER G3

Description

The SLAB CUTTER G3 System allows you to make precise cuts in large-format porcelain tiles.

Its new G3 guides are made of red aluminum, reducing the weight of the entire tool. Its exclusive design prevents the carriage from inadvertently leaving the G3 guides and improves the fastening system between them. Now it comes with a new quick coupling system. Each SLAB CUTTER includes 3 red G3 guides that allow you to make cuts in pieces up to 126" inches (10.4 ft). This capacity can be increased in sections of 3.6 ft for each incorporated guide. (Be aware these are not compatible to use with the TC-125 electric RUBI saw.)

Each guide integrates two suction cups to secure it to the tile. These suction cups have a new "non-marking" rubber base that allows you to work on light-colored materials without the risk of staining them.

The scratching carriage is light as it is made of aluminum and exerts greater marking power. Its movement through the guides is smooth and precise due to its three horizontal bearings. The "soft-grip" handle provides ergonomics and comfort for the user.

The new SLAB CUTTER G3 carriage design is equipped with a 7/8" inch EXTREME scoring wheel suitable for working on materials with rough and structured surface finish and smooth or polished finishes.

Each SLAB CUTTER, in addition to the three guides and the carriage, includes a SLAB nipper with the capacity to separate materials up to .39" (10 mm) thick. The SLAB nipper has dual functionality: A nipper for materials up to .23" (6 mm ) thick and a clamp of screw for those materials up to .39" (10 mm). The design and double function of the SLAB pliers allow the separation to be carried out with the minimum effort on the user's part.

To complete the equipment and facilitate its transport and storage, the SLAB CUTTER G3 includes a practical textile bag reinforced and equipped with internal compartments to store and secure all the components of the SLAB CUTTER G3.


References and models for SLAB CUTTER G3


Where to buy

SLAB CUTTER G3 Manual system
  • Ref. - 16900
  • EAN-13 - 8413797169003
  • card_giftcardPoints: 106
  • format_align_justify Show barcode
    close