How to Remove Floor Tile Properly

Learning how to remove floor tile properly can be rough, especially when they don’t meet you halfway and come up easily. We’ve crafted some tips and tricks.

Home improvement projects are on the rise, with Americans spending an average of $7,560 on these in 2018!

Of these projects, room remodels were the most popular. Ranking second is none other than the installation of new flooring.

Even back in 2017, projects involving floors (along with ceilings) were big. As many as 5.2 million homeowners reported getting work done for these parts of their home.

For homeowners thinking of getting a new floor, the first concern will likely be how to remove floor tile. After all, this type of flooring is present in almost U.S homes. In fact, in 2018, U.S. homeowners consumed 3.11 billion square feet of ceramic tile alone.

The thing is, there are many instances wherein floor tiles can be difficult to pry off. In this case, a regular hammer and chisel won’t make the cut. 

Tile installation problems

Tile removal Problems: How to Avoid the Worst Mistakes

What should one do in such cases then? That’s exactly what we’re here to share with you, so be sure to keep reading!

 

1. Gather these Must-Have Tools

The first step on how to remove tile that stubbornly sticks to the underlayment is to use powered tools. You’d still need manual tools to get the rest of them pried off though. So, be sure you have all the tools listed below before you start your floor tile removal project.

  • A drill with a tile drill bit (or a diamond drill bit)
  • Masonry hammer
  • Wide or cold chisel
  • A square-tipped spade
  • A floor or mortar scraper
  • A pry bar
  • A high-powered vacuum

A drill with a tile drill bit will let you bore deeper holes much more quickly on those super tough tiles. These holes will make it easier to break through both the tile and the grout. Also, if you have ceramic tiles, which are very strong, a diamond drill bit may be a better option.

Make sure you also get some plastic wrap for your furniture and have your broom and dustpan ready. Gathering these tools and materials in one place will make the tile removal — and the clean up after — faster.

Also, if you plan to recycle trim work, prepare a utility knife (with various blades) and putty knife. This’ll help you remove the trim work with a much lower risk of damage.

2. Prepare Your Home for A Big Mess

Don’t skip this step on how to remove tile floor, otherwise, dust and debris will cover most of your stuff. Considering that the average U.S. home contains about 300,000 items, they’ll be a pain to clean up after the project.

It’s best to cover your furniture with plastic wrap or tarpaulin to avoid dust settling on them. If you have a room air conditioner, cover that up too, to prevent dust from getting into it. If you have a duct or central air conditioner, cover the vents in the room you’ll be removing floor tiles from.

Don Protective Clothing and Gear

Did you know that around 4.6 million U.S. workers sustain injuries on the job every year? As if that’s not enough, these workplace injuries lead to a whopping 104 million days away from work!

As you can imagine, many of these cause injuries like cuts, lacerations, and punctures. What’s more, a huge number of them were preventable, if only workers wore the right protective gear.

That’s why personal protective equipment is crucial for your tile removal project. Remember, you’ll be handling cutting and drilling machines for the project. Also, you’ll be dealing with a lot of dust as you tear away those floor tiles.

So, before you go down on all fours, get yourself a pair of goggles and face mask. Gloves will protect your hands and let you grip the hand tools better. Don footwear that has features like slip-, puncture-, and abrasion-resistance.

3. Carefully Pry Off Trim Work

If you plan to reuse the trim work, be sure to remove them before you start prying off tiles. This way, flying debris won’t hit and damage them.

To remove trim work, use your utility tool to slice away at paint or caulk that glues the trim to the wall and floor. It’s best to use a thin, but sharp blade, although you’d likely use other blades to cut through hardened paint. Not only will this make the trim easier to remove — it’ll also prevent damage to both the trim and the wall.

Next, insert the putty knife into the sliced-up area to further loosen the trim. Wiggle and push the knife until it makes a crack big enough for you to insert the pry bar in.

Get the pry bar in the crack and carefully pry away the trim work. You can use the putty knife as a “shield” for the wall as you wiggle the pry bar.

4. Time to Drill

Most DIY-ers use only a hammer and chisel to pry away floor tiles. Professionals, however, know that a tile drill or diamond drill bit will do the job faster. This makes a drill (with the right bit) one of, if not the most important tile removal tool.

Once you’ve attached either the tile drill or diamond drill bit, get ready for some drilling! Position the drill so that the tip of the bit touches a grout line, and hold the machine at a 45-degree angle. You may have to adjust the position to find one you’re more comfortable with.

Make sure you get a firm grip on the drill before you power it on. Holding the machine steady, start chipping through the grout. Slowly advance towards the underside of the tile until it breaks into pieces.

It’s best to start from the center of the floor and make your way to either side. Continue drilling along the floor until you’ve chipped away at all the tiles.

 

5. Break Other Tiles with the Hammer

Rubiflex mallets with softgrip handle

Every self-respecting tiler still uses manual tiling tools, including a masonry hammer. Even with a powerful drill, some tiles will still stick together and make prying them off harder. A masonry hammer will allow you to break these into smaller pieces.

You can then use a wide or cold chisel to pry up what’s left of the cracked, yet still attached tiles.

6. Gather Up the Broken Tiles

Tile installation problems -

Broken tile

Once all the tiles have come loose, use the square-tipped spade to get the debris into your garbage bags. Sweep up the remaining bits of tile and grout with the broom and dustpan.

Pro Tip: A wheelbarrow will let you move out all the trash from the project site in one or two trips.

 

7. Get Rid of the Mortar

It’s important to remove all traces of mortar before installing the new tiles. Otherwise, the bumps they leave will cause an uneven surface for the new floor.

Many tiled flooring systems use thin set as the bonding agent for the tiles and underlayment. In this case, a chisel and a single mortar layer scraper will do the trick to remove the mortar. Use both tile tools to scrape away at the mortar until the surface is smooth.

For harder-to-remove mortar, you can use the masonry hammer to smash it up. Then, use the scraper to get rid of the smaller pieces of mortar still sticking to the underlayment.

8. Remove the Underlayment

Depending on the condition of the underlayment, you may also have to remove it. You may find that this part of the floor has already deteriorated. This may also be the case for mortar that simply doesn’t budge.

Either way, removing (and changing) this part will make the new floor more stable.

Let’s say you do need to get rid of the underlayment. Remove all the screws that attach it to the subfloor. Then, get your flat shovel to prop up its edges and to remove it entirely.

9. Clean Up the Subfloor

Tile installation problems - Preparing the subfloor

After getting rid of the underlayment, time to clean and prep up the subfloor! Your square-tipped shovel and scraper will let you remove any adhesive left. For smaller bits of adhesive, your chisel and hammer will do the trick.

Clean up the debris using the broom and dustpan. Then, run the high-powered vacuum to remove all traces of dust. Using a vacuum will also make it easier to ensure the subfloor is completely smooth.

Follow these Steps on How to Remove Floor Tile the Right (and Safe) Way

There you have it, the steps you should follow on how to remove floor tile that just doesn’t seem to let go. So, make sure you have the right tools and be sure to you know how to use them right. With these, plus careful preparation, you’ll get cracking on cracking those stubborn tiles.

Now that you have a tile-less floor, the next step is to figure out the kind of new flooring to get. If you need ideas, be sure to check out this list of the best tile flooring ideas for 2020!